Product Description
The Vivid GU10 9.5W Low Profile Plaster-in Twin downlight is a trimless recessed twin architectural downlight with the two lights set 150mm apart. The combination of the SORAA VIVID range of light sources and Levello Light fittings gives a luminaire which is flexible, easy to maintain and has fabulous colour rendering. Once installed it has an almost invisible appearance in the ceiling, especially when used with paintable front plates.
Soraa VIVID lamps offer beautiful and accurate colour and white rendering across the entire visible spectrum, mimicking the natural range of sunlight, to deliver unmatched quality of light for colour critical applications.
You can select from non fire-rated and 60-minute fire-rated options above; a variety of beam angles and beam shapes as well as Glare Reduction and Colour Changing Options.
The fully interchangeable design of this product within the Levello range offers unparalleled flexibility and ease of maintenance. Luminaires, lamps, and even PIR sensors can be swapped quickly and easily, ensuring that the lighting system remains versatile and up-to-date without causing damage to the ceiling.
Technical Information
Physical Characteristics
Dimensions
Cut out: Min: 215 mm x 64mm, up to 250 x 100mm
Minimum Ceiling Void Depth 87 - 91 mm
(this depends upon in which magnet the lamp is installed)
Weight
Housing & Luminaires: 770 g
Materials
Housing: Mild steel galvanised & powder coated
Electrical Characteristics
Connectors
3 Pole, 16A pluggable connectors
Cable capacity 4 x 1mm, 2 x 1.5mm
Power Factor 0.80
Input Power 230V +/- 23V, 50/60Hz
Technical Characteristics
Fire & Insulation
60-Minutes Fire-Rated or non Fire-Rated
Not suitable for covering with insulation (see insulation covering accessories)
Air Tightness
When used with a Thermahood conforms to
- C2 – Condensation
- L1 – Insulation and Air Leakage
- E1 – Sound Protection
Standards & Ratings
BSEN 60958
IP20
Warrantee
Luminaire 5 years
Soraa Lamp 3 years or 25,000 hrs
(whichever comes first)
Rated lifetime to L70 35,000 hrs
Lamp Characteristics
Lamp Output and Power
9.5 W 465 - 490 lumens
Efficacy: 49- 52 lm/W
Dimming
Compatible with trailing edge phase cut dimmers only.
Not for use with leading-edge dimmers
Dimming and Flicker T24/JA8 compliant.
Please reference our compatibility
chart (in downloads) for dimmer and transformer
information
Colour Metrics
CIE Metrics 95 CRI, R9 95
TM30 Metrics: Rf 90, Rg 100
Whiteness Index: Rw 100
UV: > 2mW/klm
Product Features
Lighting Looking Fabulous
Completely Flush Finish
Once Installed, the Luminaire fits completely flush with the ceiling making it almost invisible.
Paintable Front Plates
With our unique paintable front plate option, the front of fitting blends in with the rest of the ceiling and more importantly won't become yellow with ageing, unlike other light fittings.
Simple Easy Installation
Plaster in light fittings can be challenging to install, but with our tried and tested installation method this is simple and easy.
Flexibility
Should you or your client need to change how the space is used, the light fitting can be quickly and easily swapped for one of our other products, such as a pendant.
Simply Perfect Light
Point Source Optics™
Point Source Optics deliver exceptional beam quality with crisp shadows, perfect uniformity and precisely controlled beam distributions from 10° to 60°.
Soraa Vivid Colour™
Soraa VIVID lamps utilise full spectrum light to provide industry-leading colour rendition of CRI/95, R9/95, Rf/90, Rg/100 for precise colour reproduction.
Soraa Natural White™
Soraa VIVID lamps are engineered to deliver outstanding
whiteness rendering for true-to-life whites, which matches
or exceeds incandescent sources at 2700K and 3000K.
Easy Maintenance
No spring clips, no complicated twist and lock fixing systems, just simple magnets. Pull the insert out and swap the lamp or even change the fitting.
What's in the box
We supply everything you need to install and fit our products with the exception of a 62mm holesaw which you will find under accessories section of our website
First Fix Housing
The First Fix Twin Housing is supplied complete with the supply connector and installation instructions. The Housings can be ordered separately so that the second fix components do not get lost on site.
GU10 Lampholder and connector
The "plug and play" GU10 Lampholder is pre-wired for your convenience and simply plugs into the supply connector which is provided with the First Fix Housing
Front Plate
The Front Plate (or bezel) is zinc plated before it is finished to minimise the chances of corrosion. Paintable front plates which become more or less invisible in the ceiling are available.
Magnets
Three magnets are supplied, the lamp can be placed in the recess of any one of the magnets depending upon how far back you require the lamp to be.
Decorators Cards
We supply decorators cards to protect the interior of the first fix housing from contamination from paint or plaster. See installation instructions on their use.
Soraa Vivid Lamp
The lamp will be fitted with any accessories ordered, just fit the GU10 Connector, pop it into the installed housing and the magnet will guide it into place.
Installation
First Fix Installation
Installation is simple and the results will be fabulous, as long as you follow our installation steps.
The supply cable is terminated to the connector and to the earth strap of the housing. Next, the housing is permanently fixed into the ceiling. The ceiling is then plastered so the rim of the housing is flush with the plastered ceiling (see Video). Decorators’ cards are provided to protect the inside of the housing from contamination with paint or plaster (see previous picture).
Second Fix Installation
Fit the lamp in between the magnets (see video), plug in the connector and fit the insert into the housing. The magnets will help guide it into place.
You can download the installation leaflet from the documents tab and more information is available on our Installation Guide page - link below
PDF Guide
| Fixture | |
|---|---|
| Fire Rating | 60 Minute Fire Rated or Non Fire Rated |
| Baffle | Black or White or Special Baffle |
| Plate Finish | Paintable or RAL 9010 or Custom Plate |
| Brand | Soraa |
| Ceiling void Height | 87-95 |
| Fitting Type | Twin |
| Insert Type | Low Profile |
| Lamp type | GU10 |
| Plate Shape | Round |
| IP Rating | IP20 |
| Light Sources | |
| Beam Angle | 25° or 36° or 60° |
| Colour Temperature | 2700 K or 3000 K |
| Glare Reduction | - or Honeycomb louvre |
| Light Source Range | Soraa Vivid |
| Lamp Power | 9.5 Watts |
| CRI | 95 CRI |
| Driver | No Driver Required |
| Emergency Pack | - |