Frequently Asked Questions
Here are some common questions we receive. Feel free to browse through them all or use keywords to search. If you can't find the answer you're looking for, don't hesitate to reach out to us.
Yes remove the GU10 lamp unplug the lamp holder and replace it with an appropriate light engine set.
All products in the Flush range of downlights are available with an IP65 front plate – including directional IP65 downlights. Some of our products in other ranges such as Presence detectors are also IP65 rated.
Levello offers installation for Plaster in, Minimal trim or Trim less for apertures smaller than 62mm, and retrofit options for apertures larger than 62mm which need to be plastered in or installed with filler.
We are designed to fit any product that fits up to the MR16 (50mm), We do however recommend LED light sources for efficiency.
We do offer complete downlights including the First fix, second fix and the light sources.
For Lumin output and other Data Please see the data sheets, Levello offers products that range in lumen output from 300 Lumens to over 1000 Lumens.
Easy serviceable with our unique magnetic system, which allows you to change to whatever is new in the market. This system makes it easy to change from a downlight to a pendant, or any of our range. e.g. Change light sources for AV equipment or a speaker.
Warm whites from 2700K to cool Whites 400K. A variety of our Product range can also be offered to cool whites of 6000K.
Yes, we do supply.
Levello supplies PIR sensors as small as 10mm in diameter, with our paintable plates these practically vanish into the ceiling.
Yes. Levello offers paintable products that make your lights invisible in the ceiling.
Yes remove the GU10 lamp unplug the lamp holder and replace it with an appropriate light engine set. Yes. Levello offers paintable products that make your lights invisible in the ceiling.
Yes – you will need to drill a 64mm hole and skim plaster. Yes remove the GU10 lamp unplug the lamp holder and replace it with an appropriate light engine set.
Levello offers the choice of fire-rated and non fire-rated products across the range. The fire-Rated products have a 60 minutes fire-rating that should be suitable for most installations.
To install any of the Levello fittings, you will require a 62 mm cut out.