T4- Natural High Lumen Low Profile Minimal Trim
Stock Code :
T4- Natural High Lumen Low Profile Minimal TrimProduct Description
The Natural low profile minimal trim is an architectural downlight, combined with the natural range of light sources the luminaire is designed to give incredible colour rendering with flicker-free dimming to 0.1%. It sits proud of the ceiling by 3mm and is only 65mm in diameter, almost invisible in the ceiling especially when used with paintable front plates and provides visual comfort by reducing glare.
This product is non fire-rated (but 60-minute and 120-minute fire-rated versions are available). It is fully interchangeable with any of the products in the Levello range as all of the Levello products fit into the same housing. Luminaires and lamps can be swapped quickly and simply, should the need arise without damaging the ceiling.
The Natural High Lumen light sources Deliver up to 1271 lm (efficacy 91.5 lm/W) with a CRI of 98 (R9-99) and a colour consistency of 2.5 SCDM. These light sources have onsite changeable optics and a range of beam angles (10°, 14°, 25°, 35°, 55°) as well as an asymmetric wall wash. There is support for various driver options and a choice of dimming to either 1% or 0.1%. It is a high-quality flexible light source which suits a wide range of applications and has a lifespan of 70,000 hours.
Technical Information
Physical Characteristics
Dimensions
Cut out 62 mm
Minimum Ceiling Void Depth 105mm - 113 mm
Weight 482 g
Materials
Housing: Mild steel galvanised & powder coated
Technical Characteristics
Fire & Insulation
Non Fire-Rated
Not suitable for covering with insulation
(see insulation covering accessories)
Air Tightness
When used with a Thermahood conforms to
- C2 – Condensation
- L1 – Insulation And Air Leakage
- E1 – Sound Protection
Standards & Ratings
BSEN 60958
IP20
Warrantee
5 years (Luminaire parts and materials)
Electrical Characteristics
Connectors
3 Pole, 16A screwless
Cable capacity
4 x 1mm or 2 x 1.5mm
Emergency Pack
Available option, delivers 17% of the lumen output
Power
Light Engine 12.7W
Circuit Power add 3.5W for Driver
Protection
Thermal cut-out, Short circuit protection, Open circuit protection, Overload protection
PFC 0.95
see individual driver datasheet for more details
Product Features
Lighting Looking fabulous
Minimal Trim
Arguably one of the most discrete downlights available as it is only 3mm high and the Bezel has a diameter of 65mm
Paintable front plates
With our unique paintable front plate option the front of fitting blends in with the rest of the ceiling and more importantly won't become yellow with ageing unlike other light fittings.
Wide range of accessories
Allowing you to customise not only the look of the light fitting, but also the light coming out of it. Check out our range of baffles, front plates, lenses and filters.
... simple to use and maintain
Easy maintenance
No spring clips, no complicated twist and lock fixing systems, just simple magnets, pull the insert out and swap the lamp or even change the fitting.
Flexibility
Should you or your client need to change how the space is used, the light fitting can be quickly and easily swapped for one of our other products such as a pendant.
What's in the box
This product has everything you need to install and fit our product with the exception of the GU10 lamp
First Fix Housing
The Housing (or Mounting Ring) complete with the supply connector and installation instructions
Magnets
Three magnets are supplied, they have a small recess in them to hold the lamp in place. the Lamp can be located in between any of the magnets - depending on the look required
Painting Card
We supply a painting card to protect the interior of the first fix housing from contamination from paint, if you are painting the ceiling with the housing installed
5-Year Warrantee
Levello products come with a 5-year warrantee
Installation
First Fix Installation
Installation is simple and quick.
A reasonably accurate 62mm hole needs to be cut in the ceiling, our Holesaw Stabiliser is ideal for this. The supply cable is terminated to the connector and then the housing is inserted into the hole, twisting it clockwise to allow Housing anchors to lock into place.
If painting after the housing has been installed please use the Painting cards provided to protect the inside of the housing from contamination.
Second Fix Installation
Firstly, fit the lamp into the Low Profile Insert (see previous video), plug in the connector and fit the insert into the housing.
You can download the installation leaflet from the documents tab and more information is available on our Installation Guide page - link below
PDF Guide