Spotlight

Price:

£ 139.61


Soraa Constant Current 1-10V Driver
Soraa Constant Current 1-10V Driver
£ 49.98
£ 49.98
Twin Housing
Twin Housing
£ 34.00
£ 34.00

Spotlight

£ 139.61 139.61 GBP £ 139.61

£ 138.76


This combination does not exist.


Stock Code :
LE4025BP
Share :

Product Description

The GU10 DEEP Minimal Trim is a recessed architectural downlight, with a deep internal baffle, designed to fit a standard GU10 lamp. It sits proud of the ceiling by 3mm and is only 65mm in diameter so is almost invisible in the ceiling, especially when used with paintable front plates, the luminaire provides visual comfort by reducing the glare.

This product is non fire-rated (but 60-minute and 120-minute fire-rated versions are available). It is fully interchangeable with any of the products in the Levello range as all of the Levello products fit into the same housing. Luminaires and lamps can be swapped quickly and simply, should the need arise without damaging the ceiling. 

Although we recommend Soraa Lamps or our light engines, this product can be used with almost any GU10 lamp as long as the diameter of the front of the lamp is less than 50mm. Ceiling void heights are calculated based on the Soraa lamp which is 53.5 mm high.

               Technical Information

Physical Characteristics

Dimensions

Cut out                                          62 mm

Minimum Ceiling Void Depth    112 mm

  1. measured with 53.5 GU10 lamp - Measure your lamp

 Weight

(excluding GU10 Lamp)             214 g

Materials

Housing: Mild steel galvanised & powder coated

Insert: Anodised aluminium

Technical Characteristics

Fire & Insulation

Non Fire-Rated

Not suitable for covering with  insulation

     (see insulation covering accessories)

Air Tightness

When used with a Thermahood conforms to 

  • C2 – Condensation
  • L1 – Insulation And Air Leakage
  • E1 – Sound Protection

Standards & Ratings

BSEN 60958

IP20

Warrantee

5 years (Luminaire parts and materials)

Electrical Characteristics

Connectors

3 Pole

16A screwless

Cable capacity

    4 x 1mm

    2 x 1.5mm


Lamp Suitability

25W Halogen

25W LED

Product Features

Lighting Looking fabulous

Minimal Trim

Arguably one of the most discrete downlights available as it is only 3mm high and the Bezel has a diameter of 65mm

Paintable front plates

With our unique paintable front plate option the front of fitting blends in with the rest of the ceiling and more importantly won't become yellow with ageing, unlike other light fittings.

Wide range of accessories

Allowing you to customise not only the look of the light fitting, but also the light coming out of it. Check out our range of baffles, front plates, lenses and filters.

... simple to use and maintain

Easy maintenance

No spring clips, no complicated twist and lock fixing systems, just simple magnets, pull the insert out and swap the lamp or even change the fitting.

Flexibility

Should you or your client need to change how the space is used, the light fitting can be quickly and easily swapped for one of our other products such as a pendant.

What's in the box

This product has everything you need to install and fit our product with the exception of the GU10 lamp

First Fix Housing

The Housing (or mounting ring) complete with the supply connector and installation instructions

GU10 Lampholder and Connector

The "plug and play" GU10 Lampholder is pre-wired for your  convenience

Deep Insert

The Deep insert is supplied with a spring clip to fix the lamp into the insert, optional baffles are available (see above)

Magnets

Two magnets are supplied - as the Levello system requires 3 magnets in total - the third magnet is attached to the Deep insert.

Painting Card

We supply a painting card to protect the interior of the first fix housing from contamination from paint if you are painting the ceiling with the housing installed

5-Year Warrantee

Levello products come with a 5-year warrantee

Installation

First Fix Installation

Installation is simple and quick.

A reasonably accurate 62mm hole needs to be cut in the ceiling, our Holesaw Stabiliser is ideal for this. The supply cable is terminated to the connector and then the housing is inserted into the hole, twisting it clockwise to allow Housing anchors to lock into place. 

If painting after the housing has been installed please use the Painting cards provided to protect the inside of the housing from contamination.

Housing Installation Guide

 
 

Second Fix Installation

Firstly, fit the lamp into the Deep Insert (see previous video), plug in the connector and fit the insert into the housing.

You can download the installation leaflet from the documents tab and more information is available on our Installation Guide page  - link below

PDF Guide

                  Second Fix Installation

Old
Plate Finish Paintable Plate or RAL 9010 Plate
Uncategorized
Colour Black or White or Silver
Lamp Type- GU10

Selected Option's Documents