GU10 Low Profile Fire Rated Plaster in Downlight
Trimless fire-rated architectural downlight for GU10 Lamps (Lamp not included)
Stock Code :
LE1215BPProduct Description
The GU10 LOW PROFILE Fire-Rated Plaster in Downlight is a trimless recessed architectural downlight, Designed to fit a standard GU10 lamp. It has an almost invisible appearance in the ceiling, especially when used with paintable front plates and provides visual comfort by reducing the glare.
This product is fire-rated to 60-minute (120-minute and non fire-rated versions are available). It is fully interchangeable with any of the products in the Levello range as all of the Levello products fit into the same housing. Luminaires and lamps can be swapped quickly and simply, should the need arise without damaging the ceiling.
Although we recommend Soraa Lamps or our light engines, this product can be used with almost any GU10 lamp as long as the diameter of the front of the lamp is less than 50mm. Ceiling void heights are calculated based on the Soraa lamp which is 53.5 mm high.
Technical Information
Physical Characteristics
Dimensions
Cut out 62 mm
Minimum Ceiling Void Depth 87 - 95 mm
- measured with 53.5 GU10 lamp - Measure your lamp
- this depends upon in which magnet the lamp is installed
Weight
(excluding GU10 Lamp)
with Classic Housing 189 g
with Retrofit Housing 273 g
Materials
Housing: Mild steel galvanised & powder coated
Technical Characteristics
Fire & Insulation
60 Minutes Fire-Rated
Not suitable for covering with insulation
(see insulation covering accessories)
Air Tightness
When used with a Thermahood conforms to
- C2 – Condensation
- L1 – Insulation And Air Leakage
- E1 – Sound Protection
Standards & Ratings
BSEN 60958
IP20
Warrantee
5 years (Luminaire parts and materials)
Electrical Characteristics
Connectors
3 Pole
16A screwless
Cable capacity
4 x 1mm
2 x 1.5mm
Lamp suitability
25W Halogen
25W LED
Product Features
Lighting Looking fabulous
Completely flush finish
Once Installed, the Luminaire fits completely flush with the ceiling making it almost invisible.
Paintable front plates
With our unique paintable front plate option the front of fitting blends in with the rest of the ceiling and more importantly won't become yellow with ageing, unlike other light fittings.
Wide range of accessories
Allowing you to customise not only the look of the light fitting, but also the light coming out of it. Check out our range of baffles, front plates, lenses and filters.
... simple to use and maintain
Simple easy installation
Plaster in light fittings can be challenging to install, but with our tried and tested installation method this is simple and easy.
Easy maintenance
No spring clips, no complicated twist and lock fixing systems, just simple magnets, pull the insert out and swap the lamp or even change the fitting.
Flexibility
Should you or your client need to change how the space is used, the light fitting can be quickly and easily swapped for one of our other products such as a pendant.
60-Minute Fire Rating
Fire-rated to 60 minutes with Levello's unique fire protection system
What's in the box
This product has everything you need to install and fit our product with the exception of the GU10 lamp
First Fix Housing
The Fire Rated Housing is supplied complete with the supply connector and installation instructions.
Magnets
Three magnets are supplied, they have a small recess in them to hold the lamp in place. the Lamp can be located in between any of the magnets - depending on the look required
Decorators Cards
We supply decorators cards to protect the interior of the first fix housing from contamination from paint or plaster
5-Year Warrantee
Levello products come with a 5-year warrantee
Installation
First Fix Installation
Installation is simple and the results will be good as long as you follow our installation steps.
The supply cable is terminated to the connector and then housing is permanently fixed into the ceiling. The ceiling is then plastered so the rim of the housing is flush with the plastered ceiling See (see Video). Decorators’ cards are provided to protect the inside of the housing from contamination with paint or plaster (see previous picture).
Second Fix Installation
Firstly, fit the lamp into the Low Profile Insert (see previous video), plug in the connector and fit the insert into the housing.
You can download the installation leaflet from the documents tab and more information is available on our Installation Guide page - link below
PDF Guide
| Old | |
|---|---|
| Lenses & Filters- | No Lens or Honeycomb Louvre |
| Plate Finish- | Paintable Plate or RAL 9010 Plate or Special Plate |
| Baffle- | Black Baffle or White Baffle or No Baffle or Custom Baffle Colour |
| Installation | |
| Housing Type | Classic Housing or Retrofit Housing |