Product Description
The Levello series of miniature PIR (passive infrared) presence detectors provide automatic control of lighting loads with optional manual control. There are three models available: On/off, direct dim, and analogue dim, all of which will switch incandescent, fluorescent and compact fluorescent lighting. The direct dim variant controls DALI or DSI digital dimming -ballasts whilst the analogue dim variant controls 1-10V dimming ballasts.
The unit detects movement using a PIR sensor and turns the load on. When an area is no longer occupied the load will switch off after an adjustable time-out period.
All functionality is fully programmable using an IR headset. These products are available with either a powder-coated front plate or a paintable plate. The sensor module must be removed from the housing and front plate assembly before painting.
Technical Information
Physical Characteristics
Dimensions
Cut out 62 mm
Minimum Ceiling Void Depth 115 mm
- measured with 53.5 GU10 lamp - Measure your lamp
Weight
(excluding GU10 Lamp)
with Classic Housing 233 g
with Retrofit Housing 317 g
Materials
Housing: Mild steel galvanised & powder coated
Insert: Anodised aluminium
Technical Characteristics
Fire & Insulation
60-Minute Fire-Rated
Not suitable for covering with insulation
(see insulation covering accessories)
Air Tightness
When used with a Thermahood conforms to
- C2 – Condensation
- L1 – Insulation And Air Leakage
- E1 – Sound Protection
Standards & Ratings
BSEN 60958
IP20
Warrantee
5 years (Luminaire parts and materials)
Electrical Characteristics
Connectors
3 Pole
16A screwless
Cable capacity
4 x 1mm
2 x 1.5mm
Lamp suitability
25W Halogen
25W LED
Product Features
Lighting Looking fabulous
Completely flush finish
The Luminaire fits completely flush with the ceiling making it almost invisible.
Paintable front plates
With our unique paintable front plate option the front of fitting blends in with the rest of the ceiling and more importantly won't become yellow with ageing, unlike other light fittings.
Wide range of accessories
Allowing you to customise not only the look of the light fitting, but also the light coming out of it. Check out our range of baffles, front plates, lenses and filters.
PIR Sensor
Detects movement within the unit’s detection range, allowing load control in response to changes in occupancy.
IR Receiver
Receives control and programming commands from an IR (infrared) handset.
RJ11 connector
The sensor head has a flying lead with an RJ11 plug at the end plugs into the RJ11 socket on the power supply.
Standard power supply
This power supply has a 6A relay. It also has connections for an external switch that can be used to turn on the load when the absence detection mode has been set or raised/lowered with dimming variants.
... simple to use and maintain
Simple easy installation
Plaster in light fittings can be challenging to install, but with our tried and tested installation method this is simple and easy.
Easy maintenance
No spring clips, no complicated twist and lock fixing systems, just simple magnets, pull the insert out and swap the lamp or even change the fitting.
Flexibility
Should you or your client need to change how the space is used, the light fitting can be quickly and easily swapped for one of our other products such as a pendant.
60-Minute Fire Rating
Fire-rated to 60 minutes with Levello's unique fire protection system
Light Level Sensor
Measures the overall light level in the detection area.
Slim-line power supply
Where space is at a premium the slim-line power supply is compact and suitable for luminaire mounting where a 2A relay is sufficient. This power supply does not have connections for external switches.
What's in the box
This product has everything you need to install and fit our product with the exception of the GU10 lamp
First Fix Housing
The Fire Rated Housing (or mounting ring) complete with the supply connector and installation instructions
Deep insert
The Fire Rated Deep insert is supplied with a spring clip to fix the lamp into the insert
Magnets
Two magnets are supplied - as the Levello system requires 3 magnets in total - the third magnet is attached to the Deep insert.
Decorators Cards
We supply decorators cards to protect the interior of the first fix housing from contamination from paint or plaster
5-Year Warrantee
Levello products come with a 5-year warrantee
Installation
First Fix Installation
Installation is simple and the results will be good as long as you follow our installation steps.
The supply cable is terminated to the connector and then housing is permanently fixed into the ceiling. The ceiling is then plastered so the rim of the housing is flush with the plastered ceiling See (see Video). Decorators’ cards are provided to protect the inside of the housing from contamination with paint or plaster (see previous picture).
Second Fix Installation
Firstly, fit the lamp into the Deep Insert (see previous video), plug in the connector and fit the insert into the housing.
You can download the installation leaflet from the documents tab and more information is available on our Installation Guide page - link below
PDF Guide
| Plate Finish- | Paintable Plate or RAL 9010 Plate or Special Plate |