Product Description
The GU10 DEEP Minimal Trim is a recessed architectural downlight, with a deep internal baffle, designed to fit a standard GU10 lamp. It sits proud of the ceiling by 3mm and is only 65mm in diameter so is almost invisible in the ceiling, especially when used with paintable front plates, the luminaire provides visual comfort by reducing the glare.
This product is non fire-rated (but 60-minute and 120-minute fire-rated versions are available). It is fully interchangeable with any of the products in the Levello range as all of the Levello products fit into the same housing. Luminaires and lamps can be swapped quickly and simply, should the need arise without damaging the ceiling.
Although we recommend Soraa Lamps or our light engines, this product can be used with almost any GU10 lamp as long as the diameter of the front of the lamp is less than 50mm. Ceiling void heights are calculated based on the Soraa lamp which is 53.5 mm high.
Technical Information
Physical Characteristics
Dimensions
Cut out 62 mm
Minimum Ceiling Void Depth 112 mm
- measured with 53.5 GU10 lamp - Measure your lamp
Weight
(excluding GU10 Lamp) 214 g
Materials
Housing: Mild steel galvanised & powder coated
Insert: Anodised aluminium
Technical Characteristics
Fire & Insulation
Non Fire-Rated
Not suitable for covering with insulation
(see insulation covering accessories)
Air Tightness
When used with a Thermahood conforms to
- C2 – Condensation
- L1 – Insulation And Air Leakage
- E1 – Sound Protection
Standards & Ratings
BSEN 60958
IP20
Warrantee
5 years (Luminaire parts and materials)
Electrical Characteristics
Connectors
3 Pole
16A screwless
Cable capacity
4 x 1mm
2 x 1.5mm
Lamp Suitability
25W Halogen
25W LED
Product Features
Lighting Looking fabulous
Minimal Trim
Arguably one of the most discrete downlights available as it is only 3mm high and the Bezel has a diameter of 65mm
Paintable front plates
With our unique paintable front plate option the front of fitting blends in with the rest of the ceiling and more importantly won't become yellow with ageing, unlike other light fittings.
Wide range of accessories
Allowing you to customise not only the look of the light fitting, but also the light coming out of it. Check out our range of baffles, front plates, lenses and filters.
... simple to use and maintain
Easy maintenance
No spring clips, no complicated twist and lock fixing systems, just simple magnets, pull the insert out and swap the lamp or even change the fitting.
Flexibility
Should you or your client need to change how the space is used, the light fitting can be quickly and easily swapped for one of our other products such as a pendant.
What's in the box
This product has everything you need to install and fit our product with the exception of the GU10 lamp
First Fix Housing
The Housing (or mounting ring) complete with the supply connector and installation instructions
Deep Insert
The Deep insert is supplied with a spring clip to fix the lamp into the insert, optional baffles are available (see above)
Magnets
Two magnets are supplied - as the Levello system requires 3 magnets in total - the third magnet is attached to the Deep insert.
Painting Card
We supply a painting card to protect the interior of the first fix housing from contamination from paint if you are painting the ceiling with the housing installed
5-Year Warrantee
Levello products come with a 5-year warrantee
Installation
First Fix Installation
Installation is simple and quick.
A reasonably accurate 62mm hole needs to be cut in the ceiling, our Holesaw Stabiliser is ideal for this. The supply cable is terminated to the connector and then the housing is inserted into the hole, twisting it clockwise to allow Housing anchors to lock into place.
If painting after the housing has been installed please use the Painting cards provided to protect the inside of the housing from contamination.
Second Fix Installation
Firstly, fit the lamp into the Deep Insert (see previous video), plug in the connector and fit the insert into the housing.
You can download the installation leaflet from the documents tab and more information is available on our Installation Guide page - link below
PDF Guide
| Spotlights | |
|---|---|
| Colour | Black or White or Silver |
| Lamp Type- | Light Engine |
| Light Sources- i | |
| Colour Temperature-o | 2700k or 3000k or 4000k |
| Old | |
| Plate Finish- | Paintable Plate or RAL 9010 Plate |
| Uncategorized | |
| Control-o | Phase Dimmable or DALI or 1-10v |