GU10 Low Profile Fire Rated Minimal Trim


£ 32.26

GU10 IP65 Low Profile Fire Rated Minimal Trim
GU10 IP65 Low Profile Fire Rated Minimal Trim
£ 33.91
£ 33.91
User Handset
User Handset
£ 25.99
£ 25.99

GU10 Low Profile Fire Rated Minimal Trim

Fire-rated architectural downlight for GU10 Lamps (Lamp not included)

£ 32.26 32.26 GBP £ 32.26

£ 29.91

This combination does not exist.

Stock Code :
Share :

Product Description

The GU10 LOW PROFILE Fire-Rated Plaster in Downlight is a trimless architectural downlight, with a deep internal baffle, designed to fit a standard GU10 lamp. It has an almost invisible appearance in the ceiling, especially when used with paintable front plates and provides visual comfort by reducing the glare.

This product is fire-rated to 60-minute (120-minute and non fire-rated versions are available). It is fully interchangeable with any of the products in the Levello range as all of the Levello products fit into the same housing. Luminaires and lamps can be swapped quickly and simply, should the need arise without damaging the ceiling.

Although we recommend Soraa Lamps or our light engines, this product can be used with almost any GU10 lamp as long as the diameter of the front of the lamp is less than 50mm. Ceiling void heights are calculated based on the Soraa lamp which is 53.5 mm high.

Technical Information

Physical Characteristics


Cut out                                          62 mm

Minimum Ceiling Void Depth    85 - 92 mm

  1. measured with 53.5 GU10 lamp - Measure your lamp


(excluding GU10 Lamp)            189 g


Housing: Mild steel galvanised & powder coated

Technical Characteristics

Fire & Insulation

60 Minutes Fire-Rated

Not suitable for covering with  insulation

     (see insulation covering accessories)

Air Tightness

When used with a Thermahood conforms to 

  • C2 – Condensation
  • L1 – Insulation And Air Leakage
  • E1 – Sound Protection

 Standards & Ratings

BSEN 60958



5-years (Luminaire parts and materials)

Electrical Characteristics


3 Pole

16A screwless

Cable capacity

    4 x 1mm

    2 x 1.5mm

Lamp Suitability

25W Halogen


Product Features

Lighting Looking fabulous

Minimal Trim

Arguably one of the most discrete downlights available as it is only 3mm high and the Bezel has a diameter of 65mm

Paintable front plates

With our unique paintable front plate option the front of fitting blends in with the rest of the ceiling and more importantly won't become yellow with ageing unlike other light fittings.

Wide range of accessories

Allowing you to customise not only the look of the light fitting, but also the light coming out of it. Check out our range of baffles, front plates, lenses and filters.

... simple to use and maintain

Easy maintenance

No spring clips, no complicated twist and lock fixing systems, just simple magnets, pull the insert out and swap the lamp or even change the fitting.


Should you or your client need to change how the space is used, the light fitting can be quickly and easily swapped for one of our other products such as a pendant.

60-Minute Fire Rating

Fire-rated to 60 minutes with Levello's unique fire protection system

What's in the box

This product has everything you need to install and fit our product with the exception of the GU10 lamp

First Fix Housing

The Fire Rated Housing complete with the supply connector and  installation instructions

GU10 Lampholder and Connector

The "plug and play" GU10 Lampholder is pre-wired for your  convenience


Three magnets are supplied, they have a small recess in them to hold the lamp in place. the Lamp can be located in between any of the magnets - depending on the look required

Painting Card

We supply a painting card to protect the interior of the first fix housing from contamination from paint, if you are painting the ceiling with the housing installed

5-Year Warrantee

Levello products come with a 5-year warrantee


First Fix Installation

Installation is simple and quick.

A reasonably accurate 62mm hole needs to be cut in the ceiling, our Holesaw Stabiliser is ideal for this. The supply cable is terminated to the connector and then the housing is inserted into the hole, twisting it clockwise to allow Housing anchors to lock into place. 

If painting after the housing has been installed please use the Painting cards provided to protect the inside of the housing from contamination.

 Housing Installation Guide


Second Fix Installation

Firstly, fit the lamp into the Low Profile Insert (see previous video), plug in the connector and fit the insert into the housing.

You can download the installation leaflet from the documents tab and more information is available on our Installation Guide page  - link below

PDF Guide

                   Second Fix Installation

Lenses & Filters-t None or Add Lenses
Baffle-t Black or White or No Baffle or Custom
Plate Finish-t Paintable or RAL 9010 or Special Plate
Low Profile Insert Installation Guide.pdf
Low Profile GU10 FR Minimal Trim.pdf

Selected Option's Documents