GU10 Directional Plaster in Downlight
Trimless architectural adjustable downlight with deep internal
baffle for GU10 Lamps (Lamp not included)
Stock Code :
LE1035BPProduct Description
The GU10 PLASTER-IN DIRECTIONAL is a trimless recessed architectural downlight, with a deep internal baffle, which tilts by 35° and rotates by 360°, designed to fit a standard GU10 lamp. It has an almost invisible appearance in the ceiling, especially when used with paintable front plates and provides visual comfort by reducing the glare.
This product is non fire-rated (but 60-minute and 120-minute fire-rated versions are available). It is fully interchangeable with any of the products in the Levello range as all of the Levello products fit into the same housing. Luminaires and lamps can be swapped quickly and simply, should the need arise without damaging the ceiling.
Although we recommend Soraa Lamps or our light engines, this product can be used with almost any GU10 lamp as long as the diameter of the front of the lamp is less than 50mm. Ceiling void heights are calculated based on the Soraa lamp which is 53.5 mm high.
Technical Information
Physical Characteristics
Dimensions
Cut out 62 mm
Minimum Ceiling Void Depth 133 mm
- measured with 53.5 GU10 lamp - Measure your lamp
Weight
(excluding GU10 Lamp)
with Classic Housing 204 g
with Retrofit Housing 288 g
Materials
Housing: Mild steel galvanised & powder coated
Adjustability
Tilt angle up to 35°
Rotation 360°
Technical Characteristics
Fire & Insulation
Non Fire-Rated
Not suitable for covering with insulation
(see insulation covering accessories)
Air Tightness
When used with a Thermahood conforms to
- C2 – Condensation
- L1 – Insulation And Air Leakage
- E1 – Sound Protection
Standards & Ratings
BSEN 60958
IP20
Warrantee
5 years (Luminaire parts and materials)
Electrical Characteristics
Connectors
3 Pole
16A screwless
Cable capacity
4 x 1mm
2 x 1.5mm
Lamp suitability
25W Halogen
25W LED
Product Features
Lighting Looking fabulous
Completely flush finish
The Luminaire fits completely flush with the ceiling making it almost invisible.
Paintable front plates
With our unique paintable front plate option the front of fitting blends in with the rest of the ceiling and more importantly won't become yellow with ageing, unlike other light fittings.
Wide range of accessories
Allowing you to customise not only the look of the light fitting, but also the light coming out of it. Check out our range of baffles, front plates, lenses and filters.
... simple to use and maintain
Simple easy installation
Plaster in light fittings can be challenging to install, but with our tried and tested installation method this is simple and easy.
Easy maintenance
No spring clips, no complicated twist and lock fixing systems, just simple magnets, pull the insert out and swap the lamp or even change the fitting.
Flexibility
Should you or your client need to change how the space is used, the light fitting can be quickly and easily swapped for one of our other products such as a pendant.
Adjustable to 35°
The mechanism is completely recessed in the ceiling and there is an option of an Obroub plate for feature lighting.
360° Rotation
The beam can be simply adjusted by simply turning it inside the housing and can be rotated by 360°
What's in the box
This product has everything you need to install and fit our product with the exception of the GU10 lamp
First Fix Housing
The Housing complete with the supply connector and installation instructions
Directional insert
The Directional insert is supplied with a spring clip to fix the lamp into the insert
Magnets
Two magnets are supplied - as the Levello system requires 3 magnets in total - the third magnet is attached to the Directional insert.
Decorators Cards
We supply decorators cards to protect the interior of the first fix housing from contamination from paint or plaster
5-Year Warrantee
Levello products come with a 5-year warrantee
Installation
First Fix Installation
Installation is simple and the results will be good as long as you follow our installation steps.
The supply cable is terminated to the connector and then housing is permanently fixed into the ceiling. The ceiling is then plastered so the rim of the housing is flush with the plastered ceiling See (see Video). Decorators’ cards are provided to protect the inside of the housing from contamination with paint or plaster (see previous picture).
Second Fix Installation
Firstly, fit the lamp into the Directional Insert (see previous video), plug in the connector and fit the insert into the housing.
You can download the installation leaflet from the documents tab and more information is available on our Installation Guide page - link below
PDF Guide
| Old | |
|---|---|
| Plate Shape- | Round or Obround |
| Lenses & Filters- | No Lens or Honeycomb Louvre |
| Plate Finish- | Paintable Plate or RAL 9010 Plate or Special Plate |
| Baffle- | Black Baffle or White Baffle or No Baffle or Custom Baffle Colour |
| Installation | |
| Housing Type | Classic Housing or Retrofit Housing |