GU10 Directional Fire Rated Minimal Trim
Architectural fire-rated adjustable downlight with deep internal
baffle for GU10 Lamps (Lamp not included)
Stock Code :
LEM1235BPProduct Description
The GU10 DIRECTIONAL Fire-Rated Plaster in Downlight is a trimless recessed architectural fire-rated downlight, with a deep internal baffle, which tilts by 35° and rotates by 360°. It sits proud of the ceiling by 3mm and is only 65mm in Diameter so is almost invisible in the ceiling, especially when used with paintable front plates, the luminaire provides visual comfort by reducing the glare
This product is fire-rated to 60-minute (120-minute and non fire-rated versions are available). It is fully interchangeable with any of the products in the Levello range as all of the Levello products fit into the same housing. Luminaires and lamps can be swapped quickly and simply, should the need arise without damaging the ceiling.
Although we recommend Soraa Lamps or our light engines, this product can be used with almost any GU10 lamp as long as the diameter of the front of the lamp is less than 50mm. Ceiling void heights are calculated based on the Soraa lamp which is 53.5 mm high.
Technical Information
Physical Characteristics
Dimensions
Cut out 62 mm
Minimum Ceiling Void Depth 130 mm
- measured with 53.5 GU10 lamp - Measure your lamp
Weight
(excluding GU10 Lamp) 215 g
Materials
Housing: Mild steel galvanised & powder coated
Adjustability
Tilt angle up to 35°
Rotation 360°
Technical Characteristics
Fire & Insulation
60 Minutes Fire-Rated
Not suitable for covering with insulation
(see insulation covering accessories)
Air Tightness
When used with a Thermahood conforms to
- C2 – Condensation
- L1 – Insulation And Air Leakage
- E1 – Sound Protection
Standards & Ratings
BSEN 60958
IP20
Warrantee
5 years (Luminaire parts and materials)
Electrical Characteristics
Connectors
3 Pole
16A screwless
Cable capacity
4 x 1mm
2 x 1.5mm
Lamp Suitability
25W Halogen
25W LED
Product Features
Lighting Looking fabulous
Minimal Trim
Arguably one of the most discrete downlights available as it is only 3mm high and the Bezel has a diameter of 65mm
Paintable front plates
With our unique paintable front plate option the front of fitting blends in with the rest of the ceiling and more importantly won't become yellow with ageing, unlike other light fittings.
Wide range of accessories
Allowing you to customise not only the look of the light fitting, but also the light coming out of it. Check out our range of baffles, front plates, lenses and filters.
... simple to use and maintain
Easy maintenance
No spring clips, no complicated twist and lock fixing systems, just simple magnets, pull the insert out and swap the lamp or even change the fitting.
Flexibility
Should you or your client need to change how the space is used, the light fitting can be quickly and easily swapped for one of our other products such as a pendant.
35° Tilt, 360° Rotation
The mechanism is completely recessed in the ceiling and can tilt by 35° and rotate by 360°
60-Minute Fire Rating
Fire-rated to 60 minutes with Levello's unique fire protection system
What's in the box
This product has everything you need to install and fit our product with the exception of the GU10 lamp
First Fix Housing
The Fire Rated Housing complete with the supply connector and installation instructions
Directional Insert
The Fire-Rated Directional insert is supplied with a spring clip to fix the lamp into the insert
Magnets
Two magnets are supplied - as the Levello system requires 3 magnets in total - the third magnet is attached to the Directional insert.
Decorators Cards
We supply decorators cards to protect the interior of the first fix housing from contamination from paint or plaster
5-Year Warrantee
Levello products come with a 5-year warrantee
Installation
First Fix Installation
Installation is simple and quick.
A reasonably accurate 62mm hole needs to be cut in the ceiling, our Holesaw Stabiliser is ideal for this. The supply cable is terminated to the connector and then the housing is inserted into the hole, twisting it clockwise to allow Housing anchors to lock into place.
If painting after the housing has been installed please use the Painting cards provided to protect the inside of the housing from contamination.
Second Fix Installation
Firstly, fit the lamp into the Directional Insert (see previous video), plug in the connector and fit the insert into the housing.
You can download the installation leaflet from the documents tab and more information is available on our Installation Guide page - link below
PDF Guide
| Fixture | |
|---|---|
| Baffle | Black or White or Special Baffle |
| Plate Finish | Paintable or RAL 9010 or Custom Plate |
| Plate Shape | Round or Obround |
| Old | |
| Lenses & Filters- | None or Add Lenses |