Brilliant 7.5W Deep IP65 Minimal Trim (GU10)

Price:

£ 70.11


Vivid 7.5W Directional Minimal Trim (GU10)
Vivid 7.5W Directional Minimal Trim (GU10)
£ 70.01
£ 70.01
Brilliant 7.5W Deep IP65 Plaster-in (GU10)
Brilliant 7.5W Deep IP65 Plaster-in (GU10)
£ 58.61
£ 58.61

Brilliant 7.5W Deep IP65 Minimal Trim (GU10)

£ 70.11 70.11 GBP £ 70.11

£ 58.61


  • Brand
  • Ceiling void Height
  • Fire Rating
  • Insert Type
  • Lamp type
  • Plate Shape
  • IP Rating
  • Light Source Range
  • Lamp Power
  • Beam Angle
  • CRI
  • Colour Temperature
  • Driver
  • Emergency Pack
  • Glare Reduction
  • Colour Changing Effects

This combination does not exist.


Brand: Soraa
Soraa

Soraa



Share :

Product Description

The Brilliant GU10 7.5W Deep IP65 Minimal Trim Downlight is a recessed deep baffled architectural downlight, which is suitable for Zones 1 and 2. The combination of the SORAA Brilliant range of light sources and Levello Light fittings gives a luminaire which is flexible, easy to maintain and has excellent colour rendering. At only 2.5 mm proud of the ceiling it is one of the most discrete products on the market, has an almost invisible appearance in the ceiling, especially when used with paintable front plates.

Soraa Brilliant lamps offer a highly efficient, high-lumen solution combining excellent colour performance and world class optics at an affordable price point.

You can select from non fire-rated and 60-minute fire-rated options above; a variety of beam angles and beam shapes as well as Glare Reduction and Colour Changing Options.

This product is fully interchangeable with any of the products in the Levello range (all of the Levello products fit into the same housing). Luminaires and lamps (and even PIR's) can be swapped quickly and simply, should the need arise simply, quickly and easily without damaging the ceiling.

Technical Information

Physical Characteristics

Dimensions

Cut out: 62 mm

Minimum Ceiling Void Depth 115 – 123 mm

(this depends upon any lenses or filters which are installed)

Weight

Housing and Luminaire:  275 g

Materials

Housing: Mild steel galvanised & powder coated

Electrical Characteristics

Connectors

3 Pole, 16A pluggable connectors

Cable capacity 4 x 1mm, 2 x 1.5mm

Power Factor 0.80

Input Power 230V +/- 23V, 50/60Hz

Technical Characteristics

Fire & Insulation

60-Minutes Fire-Rated or non Fire-Rated

Not suitable for covering with insulation (see insulation covering accessories)

Air Tightness

When used with a Thermahood conforms to

  • C2 – Condensation
  • L1 – Insulation and Air Leakage
  • E1 – Sound Protection

Standards & Ratings

BSEN 60958

IP65

Warrantee

Luminaire 5 years

Soraa Lamp 3 years or 25,000 hrs

(whichever comes first)

Rated lifetime to L70 35,000 hrs

Lamp Characteristics

Lamp Output and Power

7.5 W 620 - 660 lumens

Efficacy: 77 - 84 lm/W

Dimming

Compatible with trailing edge phase cut dimmers only.

Not for use with leading-edge dimmers

Dimming and Flicker T24/JA8 compliant.

Please reference our compatibility chart (in downloads) for dimmer and transformer information

Colour Metrics

CIE Metrics 90 CRI, R9 50

TM30 Metrics: Rf 90, Rg98, Rfh1: 85

McA: 3

No harmful UV or IR radiation



Product Features

Lighting Looking Fabulous

Completely Flush Finish

Once Installed, the Luminaire fits completely flush with the ceiling making it almost invisible.

Paintable Front Plates

With our unique paintable front plate option, the front of fitting blends in with the rest of the ceiling and more importantly won't become yellow with ageing, unlike other light fittings.

Simple Easy Installation

Plaster in light fittings can be challenging to install, but with our tried and tested installation method this is simple and easy.

Flexibility

Should you or your client need to change how the space is used, the light fitting can be quickly and easily swapped for one of our other products, such as a pendant.

Simply Perfect Light

Point Source Optics™

Point Source Optics deliver exceptional beam quality with crisp shadows, perfect uniformity and precisely controlled beam distributions from 10° to 60°.

Superior Colour Rendition

Soraa BRILLIANT lamps give superior colour rendition of CRI 90 and R9 50 for deeper reds and natural skin tones

Easy Maintenance

No spring clips, no complicated twist and lock fixing systems, just simple magnets. Pull the insert out and swap the lamp or even change the fitting.

What's in the box

We supply everything you need to install and fit our products with the exception of a 62mm holesaw which you will find under accessories section of our website

First Fix Housing

You can choose between using our Classic Housing or our Retrofit Housing. The First Fix Housing is supplied complete with the supply connector and installation instructions. The Housings can be ordered separately so that the second fix components do not get lost on site.

GU10 Lampholder and Connector

The "plug and play" GU10 Lampholder is pre-wired for your convenience and simply plugs into the supply connector which is provided with the First Fix Housing

IP65 Front Plate

The IP65 Front Plate (or bezel) is zinc plated before it is finished to minimise the chances of corrosion. It has glass bonded in between one of the magnets and the front plate to stop water ingress. Paintable front plates which become more or less invisible in the ceiling are available.

Deep Insert

The Deep insert comes assembled with a magnet and is supplied with a spring clip to hold the lamp in place.

Magnets

One magnet is supplied as one magnet is fixed into the Deep insert and another into the IP65 Front Plate - the Levello system requires 3 magnets in total.

Decorators Cards

We supply decorators cards to protect the interior of the first fix housing from contamination from paint or plaster. See installation instructions on their use.

Soraa Brilliant Lamp

The lamp will be fitted with any accessories ordered, just fit the GU10 Connector, pop it into the installed housing and the magnet will guide it into place.

Installation

First Fix Installation

Installation is simple and the results will be fabulous, as long as you follow our installation steps.

The supply cable is terminated to the connector and to the earth strap of the housing. Next, the housing is permanently fixed into the ceiling. The ceiling is then plastered so the rim of the housing is flush with the plastered ceiling (see Video). Decorators’ cards are provided to protect the inside of the housing from contamination with paint or plaster (see previous picture).

Installation Guide

Second Fix Installation

Fit the lamp into the Deep Insert (see video), plug in the connector and fit the insert into the housing. The magnets will help guide it into place.

You can download the installation leaflet from the documents tab and more information is available on our Installation Guide page - link below

PDF Guide

Second Fix Installation

Fixture
Fire Rating 60 Minute Fire Rated or Non Fire Rated
Baffle Black or White or Special Baffle
Plate Finish Paintable or RAL 9010 or Custom Plate
Brand Soraa
Ceiling void Height 115-122
Fitting Type Minimal Trim
Insert Type Deep
Lamp type GU10
Plate Shape Round
IP Rating IP65
Light Sources
Beam Angle 25° or 10° or 36° or 10°-25° Linear Diffusion or 10°-36° Linear Diffusion or 25°-25° Flat Top or 36°-36° Flat Top or Aim Lens (up to 20° Beam Shift)
Colour Temperature 2700 K or 3000 K
Emergency Pack - or Emergency Pack
Glare Reduction - or Honeycomb louvre
Colour Changing Effects - or Coloured Gels or 1/4 CCT Shifter or 1/2 CCT Shifter or 3/4 CCT Shifter or Soraa Enhance Lens
Light Source Range Soraa Brilliant HL
Lamp Power 7.5 Watts
CRI 90 CRI
Driver No Driver Required
Brilliant_Minimal_Trim_Deep_Datasheet.pdf
Download

Option's Documents